7/8" x 1/2" Shaft Flexible Jaw Coupler & Rubber Spider L075 Lovejoy Coupling Set

Description

7/8" x 1/2" Shaft Flexible Jaw Coupler & Rubber Spider L075 Lovejoy Coupling Set
Complete 3-piece L075 series L-Jaw type coupling assembly includes two coupler half hubs and a matching elastomer spider.
Engine Shaft Coupler Inner Bore Diameter (ID): 7/8"
Pump Shaft Coupler Inner Bore Diameter (ID): 1/2"
Engine Side Keyway Size: 3/16" x 3/32"
Pump Side Keyway Size: 1/8" x 1/16"
Outer Diameter Of Each Half (OD): 1-3/4"
Length Through Bore Size (LTB): 1-9/32"
L-075 Coupling Performance Information
Torque Rating (in lbf): 73 Inch-Pound Force
Torque Rating (Nm): 8.25 Newton Meters
Horsepower Capacity Ratings @ Varying Speeds
100 RPM: 0.12
300 RPM: 0.36
1200 RPM: 1.44
1800 RPM: 2.16
3600 RPM: 4.32
Number Of Jaws: 3
Maximum Bore ID: 1-1/32"
Functionally and Dimensionally Interchangeable With Other Type-L Jaw Couplers From The Following Manufacturers:
Lovejoy
Browning
Martin
Jeffrey
Maurey
Morse
The RuggedMade 3-piece flexible jaw coupling assembly replaces hubs on various industrial power transmission applications such as log splitters, compressors, blowers, pumps, conveyors, mixers, and gear boxes, among others. Flexible couplings are used to link two rotating shafts to transmit the rotational power. When being used on power equipment such as a log splitter, this complete coupler assembly & elastomer will create the connection between the engine and hydraulic pump.
Each RuggedMade coupling hub is manufactured from high tensile zinc & steel which prevents any rust problems from occurring as well as providing the strength, durability you require. The included flexible elastomer spider is made from nitrile rubber (Buna-N) and sits in the middle of the two coupler halves to accommodate the normal misalignment of the two shafts.