100' FT 1" COPPER CU Liquidtight Flexible Conduit dBzSHIELD EMI EMC SLA HF NOISE

Description

Make me offer if you need a smaller quantity.
RETAIL 45 however compare at 8 retail with galvanized steel core
General Description
Brass core for lasting mechanical protection. Durable, abrasion resistant PVC jacket will not wrinkle or shrink from cut ends. Exceptional crush proof qualities. Smooth interior for easy wire pull thru. Complete protection against liquid and moisture vapor.
100-feet Brass interior for EMI(electromagnetic interference) and EMC protection
1" inside diameter, great for running underground wiring, outside locations. Great for environments with high frequency sources such as AC TIG welding.
Interior Bend radius 3" (center-line bend radius 4", Outside bend radius 4.7")
LFMC Liquid Tight Flexible Metallic Conduit
Typical best use Outdoor above or below ground, as well as concrete embedment
1" Liquid-Tight Flexible Metal Conduit, (LFMC) Type UA, Direct Burial Rated, UL Listed, 100ft Coil
Applications
Liquid-Tight Flexible Metal Conduit gives protection for wiring circuits located in extremely wet or damp areas. Also suitable for machines and equipment where ruggedness is required. Now in use on presses, welders, pumps, blowers, grinders, conveyors, automated lines, etc.
Ratings
Rated for Direct Burial. Rated for 60°, Resists sunlight, heat, oil, and chemical degradation.  Accepts standard UL Listed liquid tight connectors.  3/8" thru 11/4" armor is approved as an equipment ground. Superior protection in hostile environment.  Complies with UL standards 360, File Number E34028, CSA C22.2 File Number LL21229-4, NEC 351.  Flame Test Rating of FT-4 per CSA, C22.2.
NEC Article 500 Class I, Division 2; Classes II and III.
Specifications
Trade Size:
1 Inch
Type:
UA
Direct Burial:
Yes
Internal Diameter:
Min:  0.484 in.  Max:  0.504 in.
Outside Diameter:
Min:  0.690 in.  Max:  0.710 in.
Bending Radius:
3 Inches (inside)
Jacket Color:
Black
Jacket Material:
PVC (Polyvinyl Chloride)
Durable tubing used to protect and provide a route for electrical wiring conductors.
Conduit is typically required where wiring is exposed or where it might be subject to damage.
This conduit can be made of Brass metal interior and flexible outer water tight covering.
All conduit is installed with compatible fittings (couplings, elbows, connectors) and electrical boxes
Flexible Metal Conduit—FMC and LFMC
Flexible so it can snake through walls and other structures. 
Liquid-tight flexible metal conduit (LFMC) is a special type of flexible metal conduit that has a plastic coating and is used with sealed fittings to make it watertight. It is commonly used with outdoor equipment, such as air conditioner units.
Burrless square cut ends for easy connector installation
Clean shiny appearance. Cleaned after cutting.
Highly flexible for easy installation
Convenient packaging to assist production and ease inventory control
Smooth interior for easy wire pull through
UL Listed/CSA and UL Recognized
Complies with UL-1, UL Standard for Flexible Metal Conduit - file # E53858
Complies with CSA Standard C22.2 No. 56, file # LL 33374.